Skip to main content

How to Easily Create Text To Speech Application Language English (TTS Home) using Delphi





In previous articles have discussed how to actually make the application TextToSpeech English, but it turns out the way it is too difficult actually to make it we could use a more easy way longer and shorter code.

For info this application I created in Borland Delphi 7 and Operating System MS Windows XP SP 2 without installing any component.

Both are now open your Delphi and create a new project.
1. In unit 1 uses clause add ComObj; right under clause Implementation
2. Then make a global variable declarations SpVoice: Variant; on kalusa var or just above clause implementation

Here is a snippet of code header of Unit1


public
{Public declarations}
end;

var
Form1: TForm1;
SpVoice: Variant;

implementation
ComObj uses;

{$ R *. dfm}

Create a procedure OnCreate of the form (do double-click Form1 then you will be brought to the code editor window) until the complete code for this procedure as follows:

TForm1.FormCreate procedure (Sender: TObject);
begin
SpVoice: = CreateOleObject ('SAPI.SpVoice')
end;

Enter on Form Memo and Button components are located on the Component Palette tab standard

Then make the procedure onClick on the Button component (how to double click the Button then you will be brought to the code editor window) until the complete code for this procedure as follows:

procedure TForm1.Button1Click (Sender: TObject);
begin
SpVoice.Speak (memo1.Text)
end;

Then run it by pressing F9. Done.

Testing. Enter the text in English on memo1 and press Button1. then your application can talk. How much easier is not it?

If there is an easy to make trouble doing?

Popular posts from this blog

Login Form Delphi by Connecting to Ms Access Database.

this the step by step  to making application :

Login Form Delphi by Connecting Ms Access Database.

In making/ building application in Delphi, login Form is an important to protect application so that cannot be open by irresponsible person. This login Form is connected with database so that able to keep a lot of username data and password. Before make the application, please create a database as the picture below:
Picture :Login  form Delphi database Microsoft Access
Save the database in the folder which use to save the application


Next step is create the application

Enter the component and the source code as follows.


No Component NameProperties Value1Label1CaptionUsername2Label2CaptionPassword3Edit1Text -4Edit2Text -5Button1CaptionLogin6Adoconnection1--7AdoQuery1ConnectionADOConnection1

Arrange the component as the picture below:


Figure. Login Form Delphi design form



 Create new form



Form properties can be check in the table below
No Component NameProperties Value1Form1CaptionSuccess…

Step by step Accessing SMS With Delphi: Sending SMS Using Borland Delphi 7 Exploit Comport Component (Siemens))

In this example, will present the way how making SMS delivery program with Delphi, basically, data in data communication series between Delphi and mobile phone happen in Format Protocol Data Unit (PDU). The destination number of sending Message and message that will be sent through Delphi program that is made have to be changed into PDU Form first, next is the data will be sent through serial port to mobile phone. To make the send SMS Application , please enter the following component to Form 1.

No Component NameProperties ValueButton1CaptionConnectButton2CaptionDisConnectButton3CaptionConvert to PDUButton4CaptionSend to HPButton5CaptionClearButton6CaptionStart Send SMSButton7CaptionSet PortEdit1Text-Edit2Text<Type The SMS here>Edit3Text-Label1Caption1) Destination Number :Label2Caption2Label3CaptionPDU lengthLabel4CaptionLabel lengthComLed1--Memo1--Memo2--Comport1--Arrange the Component  in such away so that the visualization program is as follows:


Then type the follow…

The Example Using Chart In Borland Delphi 7

The Example Using Chart In Borland Delphi 7




In this writing will discuss about how to use the chart in Delphi 7. In the example that is made by using Delphi 7, chart will appear 2 data in the form of incremental data number, the first data named data 1 and the second data named data 2. Data 1 is incremental data 1 that is begun from 0 until 10; while data 2 is same. Yet, in the beginning condition of data 1 start from 0 while data 2 start from 1.


To make application as the explanation above, please enter the components in the table below into design form.


NoComponentPropertiesValueNote1Form1CaptionThe Chart of Data on Delphi 72GroupBox1CaptionThe Chart of Data on Delphi 73Label1CaptionData 14Label2CaptionData 25Edit1Text06Edit2Text07Button1CaptionShow to Chart8Button2CaptionClose9Timer1EnabledFalse10Chart--Check the NoteNote:

Double click on chart component, set the property of chart as below:


Click on  Add.. Button

Then the following chart gallery will be shown:



Choose the…