For Newbie

Wednesday, 24 August 2011

Controlling Electrical Equipment with 220 Volt Alternating Current (AC) With Delphi through Parallel Port Using Small Port Component.

Basically, controlling electrical equipment 220 Volt Alternating Current (AC) with Delphi through parallel port using Small Port component has similarities with the article entitled controlling the Light Emitting Dioda (LED) flame with Delphi through parallel port which can be accessed CLICKHERE. The difference is on the Hardware which is used. In this case, the series is replaced with transistor series as electrical switch which able to activated and non-activated relay with 12 volt DC/220 volt AC. The series which able to replace LED is as follows:


Figure. Series  of  Controlling Electrical Equipment with 220 Volt Alternating Current (AC) With Delphi through Parallel Port Using Small Port Component.

The Component listed Below:


       
No Component Name
1 Dioda 1N 4001
2 Resistor 2,2K Ω
3 Transistor BC 107
4 Vcc 12 Volt DC


 I hope this article can give benefit to the visitors, readers, developer and me. Thanks for visiting and availability for sharing this article by pressing 
Share this on Facebook
or just press like button under this posting

Share on Facebook
Share on Twitter
Share on Google+