Delphi Tips Trick

For Newbie

Iklan Responsive Atas

Responsive Ads Here

Wednesday, 24 August 2011

Controlling The Light Emitting Dioda (LED) Flame With Delphi Through Parallel Port

Light Emitting Dioda (LED) is electronic component which able to change electrical energy into light energy. Basically, this component can be used as indicator that LED series is actively flowed current.
In this case, LED will have function as indicator in pin-pin LPT port which will be accessed through small port component in Delphi. If pin LPT port have logical 1 so LED will turn on, and vise versa, if the logical is 0 then LED will off, the series are as follows:

Figure. t he LED controller series through Parallel Port / LPT Port
Figure. The series of Controlling The Light Emitting Dioda through parallelport
The program which is used to control the LED is discussed in the writing entitled Accessing Parallel Port Personal Computer (LPT Port) with Borland Delphi 7.0 using Small Port component which can be accessed CLICKHERE.

 I hope this article can give benefit to the visitors, readers, developer and me. Thanks for visiting and availability for sharing this article by pressing 
Share this on Facebook
or just press like button under this posting